Electron Temperatures and Flow Speeds of the Low Solar Corona: MACS Results from the Total Solar Eclipse of 29 March 2006 in Libya

An experiment was conducted in conjunction with the total solar eclipse on 29 March 2006 in Libya to measure both the electron temperature and its flow speed simultaneously at multiple locations in the low solar corona by measuring the visible K-coronal spectrum. Coronal model spectra incorporating the effects of electron temperature and its flow speed were matched with the measured K-coronal spectra to interpret the observations. Results show electron temperatures of (1.10±0.05) MK, (0.70±0.08) MK, and (0.98±0.12) MK, at 1.1 R _⊙ from Sun center in the solar north, east and west, respectively, and (0.93±0.12) MK, at 1.2 R _⊙ from Sun center in the solar west. The corresponding outflow speeds obtained from the spectral fit are (103±92) km s⁻¹, (0+10) km s⁻¹, (0+10) km s⁻¹, and (0+10) km s⁻¹. Since the observations were taken only at 1.1 R _⊙ and 1.2 R _⊙ from Sun center, these speeds, consistent with zero outflow, are in agreement with expectations and provide additional confirmation that the spectral fitting method is working. The electron temperature at 1.1 R _⊙ from Sun center is larger at the north (polar region) than the east and west (equatorial region).     

Simulated response to inter-annual SST variations in the Gulf Stream region

Recent studies show that mid-latitude SST variations over the Kuroshio-Oyashio Extension influence the atmospheric circulation. However, the impact of variations in SST in the Gulf Stream region on the atmosphere has been less studied. Understanding the atmospheric response to such variability can improve the climate predictability in the North Atlantic Sector. Here we use a relatively high resolution (～1°) Atmospheric General Circulation Model to investigate the mechanisms linking observed 5-year low-pass filtered SST variability in the Gulf Stream region and atmospheric variability, with focus on precipitation. Our results indicate that up to 70 % of local convective precipitation variability on these timescales can be explained by Gulf Stream SST variations. In this region, SST and convective precipitation are strongly correlated in both summer (r = 0.73) and winter (r = 0.55). A sensitivity experiment with a prescribed local warm SST anomaly in the Gulf Stream region confirms that local SST drives most of the precipitation variability over the Gulf Stream. Increased evaporation connected to the anomalous warm SST plays a crucial role in both seasons. In summer there is an enhanced local SLP minimum, a concentrated band of low level convergence, deep upward motion and enhanced precipitation. In winter we also get enhanced precipitation, but a direct connection to deep vertical upward motion is not found. Nearly all of the anomalous precipitation in winter is connected to passing atmospheric fronts. In summer the connection between precipitation and atmospheric fronts is weaker, but still important.     

Selection of Less Biased Threshold Angles for SAM Classification Using the Real Value–Area Fractal Technique

The accuracy of classification of the Spectral Angle Mapping (SAM) is warranted by choosing the appropriate threshold angles, which are normally defined by the user. Trial‐and‐error and statistical methods are commonly applied to determine threshold angles. In this paper, we discuss a real value–area (RV–A) technique based on the established concentration–area (C–A) fractal model to determine less biased threshold angles for SAM classification of multispectral images. Short wave infrared (SWIR) bands of the Advanced Spaceborne Thermal Emission and Reflection Radiometer (ASTER) images were used over and around the Sar Cheshmeh porphyry Cu deposit and Seridune porphyry Cu prospect. Reference spectra from the known hydrothermal alteration zones in each study area were chosen for producing respective rule images. Segmentation of each rule image resulted in a RV–A curve. Hydrothermal alteration mapping based on threshold values of each RV–A curve showed that the first break in each curve is practical for selection of optimum threshold angles. The hydrothermal alteration maps of the study areas were evaluated by field and laboratory studies including X–ray diffraction analysis, spectral analysis, and thin section study of rock samples. The accuracy of the SAM classification was evaluated by using an error matrix. Overall accuracies of 80.62% and 75.45% were acquired in the Sar Cheshmeh and Seridune areas, respectively. We also used different threshold angles obtained by some statistical techniques to evaluate the efficiency of the proposed RV–A technique. Threshold angles provided by statistical techniques could not enhance the hydrothermal alteration zones around the known deposits, as good as threshold angles obtained by the RV–A technique. Since no arbitrary parameter is defined by the user in the application of the RV‐A technique, its application prevents introduction of human bias to the selection of optimum threshold angle for SAM classification.     

The effect of Newtonian cooling on vertically propagating magneto-acoustic waves in a thermally conducting isothermal atmosphere (II)

In this article, we examine reflection, dissipation and attenuation of vertically propagating waves in an isothermal atmosphere under the combined effect of Newtonian cooling, thermal conduction and viscosity with a weak horizontal magnetic field. We consider the case in which the combined effect of viscosity and magnetic field is dominated by that of the thermal conduction and for small values of the Newtonian parameter. As a result, the atmosphere can be divided into three distinct regions that are connected by two transition regions. The lower and middle regions are connected by a semi-transparent barrier and the middle and upper regions are connected by an absorbing and reflecting barrier. In the connecting barriers the reflection and transmission of the waves takes place. The presence of Newtonian cooling effects on the adiabatic region, produces attenuation in the amplitudes of the waves and reduces the energy absorption in the transition regions. The reflection coefficient is determined in the lower and middle regions and the results are discussed in the context of the heating of the solar atmosphere.     

The impact of land use and land cover changes on soil erosion in western Iran

Natural Hazards - Analysis of long-term land use and land cover (LULC) changes requires up-to-date remotely sensed data to assess their effects on erosion. This is a particularly important...     

Prediction of Rock Abrasivity Index (RAI) and Uniaxial Compressive Strength (UCS) of Granite Building Stones Using Nondestructive Tests

Geotechnical and Geological Engineering - Rock abrasivity index (RAI) and uniaxial compressive strength (UCS) are two key parameters for assessing abrasivity and durability of building stones,...     

Beating words to life: subtitles,assemblage(s)capes,expression

Ostensibly, subtitles in films serve as linguistic approximations of meaning. Expectedly then, much of the debate surrounding subtitling has been concerned with representational accuracy, fidelity and authenticity. In this article I argue that by encountering subtitles as affective bodily expressions, as opposed to approximate representations of pre-existent meanings or intentions, filmic experiences may be(come) transformed and differently transformational. As a result, meaning and accuracy in subtitles as superimposed signifiers or static representations become secondary to subtitles as spatially affective- and expressive-movements intimately part of filmic scapes. The creative use of subtitling in Bekmambetov’s Russian language film Night Watch (Nochnoy dozor; 2006 [2004]) is discussed.

Experimental study on the effect of bottomless structure in front of a bottom outlet on a sediment flushing cone

One of the main problems in reservoirs is sedimentation which reduces the operating life of dams if a proper plan and analysis method are not in place.The techniques to manage sediment in reservoirs include several sustainable management techniques that route sediment through or around the reservoir.One of the main economical methods in arid and semi-arid regions is pressurized flushing using moderate drawdown of the water level of the reservoir to evacuate sediment deposited behind dams.In the current study,the effect of a new structure called a dendritic bottomless extended(DBE)outlet structure at three angles of 30°,45°,and 60°
on pressurized flushing efficiency was investigated.Consequently,45 experiments were designed for three discharge rates (Qo),three sediment levels(Hs),four types of structure,and a no-structure condition(reference test).The results indicated that the DBE structure with a 30°angle between the branches,a sedimentary dimensionless index of Hs/Do=4.59,and a flow dimensionless index of Qo=/√gD05=1:43(where g is the acceleration of gravity and Do is the diameter of the bottom outlet)lead to 10-fold increase in the sediment flushing cone dimensions and sediment removal efficiency compared to the results of the reference test.Finally,according to a statistical analysis of the results,a dimensionless equation for calculating the sediment flushing cone dimensions was developed for the tested sediment characteristics.     

High resolution facies architecture and digital outcrop modeling of the Sandakan formation sandstone reservoir,Borneo:Implications for reservoir characterization and flow simulation

Advances in photogrammetry have eased the acquisition of high-resolution digital information from outcrops, enabling faster, non-destructive data capturing and improved reservoir modeling. Geocellular models for flow dynamics with in the virtual outcrop in siliciclastic deposits at different sets of sandstone facies architecture remain, however, a challenge. Digital maps of bedding, lithological contrast, spatial-temporal variations of bedding and permeability characteristics make it more easy to understand flow tortuosity in a particular architecture. An ability to precisely model these properties can improve reservoir characterization and flow modeling at different scales. Here we demonstrate the construction of realistic 2 D sandstone facies based models for a pragmatic simulation of flow dynamics using a combination of digital point clouds dataset acquired from LiDAR and field investigation of the Sandakan Formation, Sabah, Borneo.Additionally, we present methods for enhancing the accuracy of outcrop digital datasets for producing high resolution flow simulation. A well-exposed outcrop from the Sandakan Formation, Sabah, northwest Borneo having a lateral extent of 750 m was chosen in order to implement our research approach. Sandstone facies and its connectivity are well constrained by outcrop observations, data from air-permeability measurements, bilinear interpolation of permeability, grid construction and water vector analysis for flow dynamics.These proportions were then enumerated in terms of static digital outcrop model(DOM) and facies model based on sandstone facies bedding characteristics. Flow simulation of water vector analysis through each of the four sandstone facies types show persistent spatial correlation of permeability that align with either cross-bedded orientation or straight with more dispersion high quality sandstone(porosity 21.25%-41.2%and permeability 1265.20-5986.25 mD) and moderate quality sandstone(porosity 10.44%-28.75% and permeability 21.44-1023.33 mD). Whereas, in more heterolithic sandstone(wavy-to flaser-bedded and bioturbated sandstone), lateral variations in permeability show spatially non-correlated patterns over centimeters to tens of meters with mostly of low quality sandstone(porosity 3.4%-12.31% and permeability < 1 mD to 3.21 mD). These variations reflect the lateral juxtaposition in flow dynamics. It has also been resulted that the vertical connectivity and heterogeneities in terms of flow are mostly pragmatic due to the interconnected sandstone rather than the quality of sandstone.